Weld video compilations | Electronic Cigarette Videos

======================================
Try Ecigarette For FREE At http://tryecigarette.com
======================================

How to Tack Weld - Kevin Caron
Posted by: kevincaron

Video duration: 268 seconds
Global video hits: 5104

From www.kevincaron.com - When do you just weld and when do you tack first? Artist Kevin Caron explains how to tack and the advantages of doing so, then shows you how to do it with his MIG welder - and gives you a helpful tip about getting better MIG welds first thing in the morning.

Related: how to, weld, welding, welding how to, how to welding, how to weld, tack, welder, welders, welds, welding machine, artist kevin caron, sculptor kevin caron, kevin caron studio, kevin caron studios, kevin carron

Display Video Comments | Hide Video Comments | Add Comment

HOW TO WELD: Understanding Stick Electrodes
Posted by: ChuckE2009

Video duration: 1127 seconds
Global video hits: 29515

Talking about different electrodes, their uses, and what the numbers mean

Related: stick, welding, electrodes, explained, 101, hand, tools, and, gear, weld, fab, fabrication, steel, iron, aluminum, tig, mig, oxy, acetylene, cutting, smaw, gmaw, gtaw, tool, machinery, equipment, safety, shirt, leathers, chaps, shielded, shield, arc, 6010, 6011, 6013, 7014, 7018, 7024

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

i want your opinion ...
By: nioskap. on 30 May 12, 03:24:28
i want your opinion about welding exhaust manifold inox pipes about 1mm thick for turbo aplication car ... what elecrode do you prefer about weld? reliability for over 1000 Celsious temp ? i already done my full exhaust from downpipe and back and it looks good 2 years later ... i have enought weld experience but in simple stuff's just like this i mention above ... nice+usefull video ... keep welding !!! ( sorry for my bad english )

i want to start in ...
By: IsmaelAdame. on 23 May 12, 09:09:37
i want to start in this whole world? of welding, but i want to start with a cheap set up should i go for stick welder? could i weld atv a-arms, repair engine cracks or weld aluminum or stainlees steel? thank you

Cheers for the ...
By: wheresmyspanner. on 18 May 12, 23:31:48
Cheers for the reply pal, yeah I was thinking about fabricating the brackets, tacking them on and having a local welder do the job properly, bit of insurance that? way ha :)

you? are a dude
By: catmatix. on 18 May 12, 19:15:32
you? are a dude

NOOO!! Don't do it ...
By: ChuckE2009. on 18 May 12, 15:53:06
NOOO!! Don't do it... If thats thin material, Id for sure trust 3/32" 7018 welds, done by someone who knows what they're doing, or by me. But honestly, unless you've burned dozens of pounds of the stuff, please don't try this... Plus, those frames are usually too thin to stick weld with much success. I'd have it tigged. If you make the brackets yourself, or buy them somewhere, and get everything? ready to weld up, a welding shop wouldn't charge much at all for a few short welds like that. GL

I want to weld ...
By: wheresmyspanner. on 18 May 12, 14:42:59
I want to weld brackets to mount a different subframe to my motorcycle's main frame. These welds will be holding my ass up at speeds of 180mph or? so.. Would you feel comfortable using a stick welder for applications like this? Or should I finally bite the bullet and invest in a MIG? from what i've read, to me, TIG seems overrated.

passion for welding ...
By: MrElectricyak. on 18 May 12, 05:10:43
passion for welding, lol hell? fun

gave up on you,cant ...
By: callmenort. on 18 May 12, 00:43:12
gave up on you,cant hear you over the wind noise in your? mic

you should try to ...
By: brianbirc. on 15 May 12, 23:04:41
you should try to get? a place to live insie to do videos the wind is way worse than a tractor weld up some walls to bock the wind and your video would not be retarded

I have never welded ...
By: nemeiso. on 15 May 12, 22:22:22
I have never welded before and I would like to purchase a beginers welding machine, what would you sugest I get just to start welding small stuff like making a work table? and stuff like that? Edwin

are there any stick ...
By: nico27004. on 12 May 12, 08:21:59
are there any stick electrodes that dont? need gas to weld?

you? can weld 7018s ...
By: hopking123. on 09 May 12, 05:42:03
you? can weld 7018s vertical down, i do it all the time, they come out nice, just need a faster weave.

indeed my man. Had ...
By: gregbails4. on 09 May 12, 02:01:38
indeed my man. Had a guy doing vertical? down's with 7018. on loading dock bumper's. all i can say is bad news.

Haha there's a ...
By: LetGoAndLove. on 05 May 12, 21:00:50
Haha there's a tractor coming.... Ahaha that was funny.? Good videos man, very informative.

helped so much, ...
By: Mr420rush. on 19 Apr 12, 03:35:39
helped so much, thanks!!! helped me? understand way better then my instructor

Enjoy the videos,? ...
By: Rattletrap2. on 19 Apr 12, 01:41:56
Enjoy the videos,? but that wind noise is too much! Drives me nuts!

what technques how ...
By: emmzbern. on 15 Apr 12, 11:26:49
what technques how to? good penetration?. thank you for answering my question. from philippines. jerome.

whats your favorite ...
By: JoshCollins619. on 15 Apr 12, 06:15:23
whats your favorite type of? welding?

Tractors and winds ...
By: Hesam0000. on 04 Apr 12, 21:48:47
Tractors and winds and airplanes,? so many anti-welding terrorists.

Hey ChuckE2009, ...
By: innius1999. on 29 Mar 12, 18:50:02
Hey ChuckE2009, What is your fav current, AC or DC because my instrutor? say stay AWAY from AC, So what do you think about that? Thanks, Innius1999

Those damn Tractor ...
By: MrSKSkill. on 29 Mar 12, 17:23:41
Those damn Tractor messin' up my weld in' lesson!! Great Video? Brother! ~MrSKSkill

Please Re-Make this ...
By: craig6911p. on 24 Mar 12, 08:51:00
Please Re-Make this video inside!!! I love all your? videos but I can't even hear you in half this video because of the wind noise =(

hi i would like to ...
By: itotem1. on 18 Mar 12, 00:06:02
hi i would like to work in welding company, but what? classes would you recommend for someone like me that doesn't know anything about welding. what classes you recommend?

Informative vid, ...
By: MRSketch09. on 15 Mar 12, 23:18:27
Informative vid, wish you had made it inside.. where the wind? couldn't get to you. >_>'

o and sorry i meant ...
By: MuhhRannDuhh. on 26 Feb 12, 06:25:31
o and sorry i meant to say stick? welding lol

DSN: Learning how to weld
Posted by: DesignSquadNation

Video duration: 105 seconds
Global video hits: 10727

In this video Adam teaches Mariam how to use an Arc Welder. Arc welding is a type of welding that uses a welding power supply to create an electric arc between an electrode and the base material to melt the metals at the welding point. When arc welding, you have to wear a special helmet to block the intense light from your eyes. For more Design Squad Nation go to pbskids.org

Related: welding, arc welding, metals, adam, judy, mariam, power supply, electric arc, electrode

Display Video Comments | Hide Video Comments | Add Comment

how to oxy acetylene weld
Posted by: freddytk421

Video duration: 143 seconds
Global video hits: 78156

oxy-acetylene welding demonstration how to weld. victor torch oxygen acetylene

Related: welder, lesson, tom, gingras, welding, oxygen, acetylen, gas, fuel, oxy, how, to, weld, propane, mapp, regulator, victor, torch

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

good welding not a ...
By: TheWelderman1962. on 07 Apr 12, 03:01:00
good welding not a novice in oxy acetelyne.......I used to weld at a muffler shop with oxy acetelyne in early 80s before? hardwire was used

who taught you ...
By: wotasod. on 14 Mar 12, 02:41:29
who taught you stevie wonder?

Nice hands, not? ...
By: TheDeathCrawler. on 24 Feb 12, 23:34:49
Nice hands, not? your first rodeo. Good video man

i m taking ...
By: Mrinsanepain. on 02 Feb 12, 00:46:35
i m taking fabrication in school i cant wait to start welding. my top thing i want to try is plasma? cutting

and why would you ...
By: h00mzi. on 20 Jan 12, 09:52:35
and why would you be telling me this, i can weld! all im saying is i didn't learn it in the book i learnd to weld in my workshop with a welder in my hand. if you dont belive me, i'm willing to send you pics and videos? of stuff that i made.

cold weld... ...
By: wade239. on 26 Sep 11, 00:20:53
cold weld... preheat were there is to be weld metal, make sure base metal surface is liquifying before adding filler, this will insure a perfect weld, making a good fusion of filler and base metal as one, how ever a cold weld is when you add the filler before the surface fo the base metal liquifies when adding the filler? it will appear to be welded, when over time, it will slip of the base metal do to lack of fusion...

Wow that a? big ...
By: DareSnip1n. on 20 Sep 11, 21:39:29
Wow that a? big nuetral flame!

Acetylene smell? ...
By: IroniMan100. on 04 Sep 11, 15:12:33
Acetylene smell? soo good! :)

use? a smaller tip.
By: KCobain95. on 04 Sep 11, 01:53:56
use? a smaller tip.

my 15 year old ...
By: YourEternalReward. on 17 Aug 11, 12:21:02
my 15 year old nephew can weld better then? that lol

i'm welding very ...
By: lardo444. on 17 Aug 11, 00:45:06
i'm welding very thin metal,? do i need flux?

@GIDAN2987 Sir yes ...
By: Nuffums. on 05 Aug 11, 01:17:01
@GIDAN2987 Sir yes Sir? Mr. Grammar Nazi Sir. Now go and find a new vocabulary.

and since im done ...
By: Nuffums. on 04 Aug 11, 19:05:58
and since im done wasting my time with you due to the fact that your arguments have NO substance or stability, that and the fact? that you are a waste of space that should have never even been born; here is somone else for you to "troll" on due to the fact that they left a negative comment. " CIRCLE, DIP. CIRCLE, DIP. YOUR INNER CONE IS NOT ADJUSTED? RIGHT BY THE WAY. corpeskitty 4 weeks ago"

@GIDAN2987 so why ...
By: Nuffums. on 04 Aug 11, 19:01:55
@GIDAN2987 so why dont you just run along and? lick your moms penis wrinkles

@GIDAN2987 yea, ok ...
By: Nuffums. on 04 Aug 11, 19:01:05
@GIDAN2987 yea, ok you pompus little prick, im not the one who even stared this, that was you unless you were unaware. and btw, i wassnt trolling, you need to find a new, wider vocabulary, and as far as your last "insult" you are what you eat, so yea, in that case i am a pussy.?

@GIDAN2987 a lack ...
By: Nuffums. on 01 Aug 11, 17:04:33
@GIDAN2987 a lack of respect for other people, and unlike you,? i WILL go and fuck my girlfriend, but unfortunatly for your weird fucked up mind, shes not fat, so im sorry but u cant get off to a skinny girl, so why dont you just go back to jacking off into a twinkie and eating it wishing that you HAD a girlfriend.

@GIDAN2987 ok, you ...
By: Nuffums. on 01 Aug 11, 17:02:29
@GIDAN2987 ok, you are just a fat pretentious fuck who needs to go and get a life instead of sitting on the computer all day jacking off and sitting on youtube looking for comments to troll on, just because i said "dude, thats a terrible bead"? doesnt mean that im trolling, and im not, because if i was there would be a whole lot more comments on here telling him that his welding sucks and what not. but theres not. everyone has their own opinions and you need to respect that, but you seem to have

Thanks for the vid. ...
By: bikenraider99. on 31 Jul 11, 07:22:59
Thanks for the vid. haha, HCC, that's where I'm taking the class at now!?

I Got A Victor Oxy- ...
By: TheTrainman28. on 27 Jul 11, 02:37:55
I Got A Victor Oxy-Acetylene Torch For My At Home Cutting And Welding Practices. I Enjoy? Using It, Because It Helps Me Get Better At Welding. I Took Welding In College A Few Years Back And I Can Truly Say That I Have A Passion And Hobby For Welding. I Love Bonding Steel And Metal Together.

There are? people ...
By: 1012Shaggy. on 04 Jul 11, 01:16:30
There are? people on both sides of pushing and pulling the bead. Ive just started learning welding and am starting with Oxy Ace; I have found leading with the torch and pushing with the rod easier. Do you lead with the rod for any reason?

probably too thick, ...
By: SeanHowson. on 04 Jun 11, 19:06:27
probably too thick, MMA welding would work? fine with a skilled enough man on the job :)

anybody? else think ...
By: phillyfan856. on 03 Jun 11, 02:35:52
anybody? else think those were really big pipes at firts?

@h00mzi your? a ...
By: harryanderson1991. on 31 May 11, 23:10:49
@h00mzi your? a nutter you can clearly read books well studying to be an engineer ive been making things with metal and working in the automotive trades for years quit with your 'rutile basic or celluose' bed time storys that no men really want to hear grow a pair and have a go yourself its all about expericence thats what you need you probably couldent strike a match let alone an arc! try getting yourself a job in a workshop and not infants school best of luck from the UK

Can someone say? ...
By: blazintex23. on 11 May 11, 10:41:05
Can someone say? handicap??

anything else.... ...
By: h00mzi. on 27 Feb 11, 13:32:25
anything else....btw youre being ignorant here i can weld and know the theory behind? it and youre claiming you know how to weld just by reading the books...i know how supercars are made and still i probably couldn't build one

How to Weld With a MIG Welder With Pulse Control - Kevin Caron
Posted by: kevincaron

Video duration: 459 seconds
Global video hits: 3065

From www.kevincaron.com - Artist Kevin Caron shows how to weld with a MIG welder that has pulse control, first welding without pulse, then turning on the pulse amps, frequency and width to weld thin metal. Learn more about the MigWeld 250P MIG welder at http See more how to videos at www.kevincaron.com

Related: how to video, how-to video, video, how to videos, how to, studio, machine, easy, control, metal, tool, tools, steel, equipment, artist, free video, youtube video, learn, youtube videos, studios, amp, frequency, amps, pulse, fabrication, mig welder, mig welding, wire feed, arizona artist, longevity welder, longevity welders, kevin carron, longevity welding equipment, phoenix sculptor, scottsdale sculptor, arizona sculptor, artist kevin caron, sculptor kevin caron

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

This is great..... ...
By: drumzvw. on 23 May 12, 02:36:14
This is great..... he"s like a welding Kermit? The Frog!!!

Sometimes my? brain ...
By: kevincaron. on 19 Mar 12, 02:30:47
Sometimes my? brain runs slower than my mouth. The gray hairs give me a pass on this one.....

amps? and volts are ...
By: ragnarokzero1988. on 19 Mar 12, 01:47:01
amps? and volts are not interchangeable words 19amps won't do a good job on 1/8" more like 90-100 ;)

I remember reading ...
By: peacockealot. on 17 Mar 12, 02:51:16
I remember reading somewhere once that the burnback is the? amount of burn that can occur on the wire before the arc cuts out its to allow you to be left with more or less wire sticking from the end of your torch I would assume!

Yeah, he? gets ...
By: kevincaron. on 10 Feb 12, 01:55:36
Yeah, he? gets around a lot!!!

great vid kevin... ...
By: MrMldillman. on 10 Feb 12, 01:42:33
great vid kevin...thanks hey, I know your? hair stylist! =)

thanks very much? ...
By: robotmotor. on 10 Feb 12, 01:03:06
thanks very much? and i know what i will do thanks sir

Not sure, I have ...
By: kevincaron. on 09 Feb 12, 15:02:48
Not sure, I have that problem sometimes myself. Maybe something to do with how clean the metal is or isn't. Maybe you are pushing the puddle instead of pulling. Anyone else got an Idea on this?? I don't do a lot of stick so I really? don't know...

great video ...
By: robotmotor. on 09 Feb 12, 03:16:46
great video congratulation your new machine god bless this hand :) i have qustion why the slag in my stick welder hard to take it off !!? only if i weld in flat position !!

It's weird. I can ...
By: kevincaron. on 09 Feb 12, 02:37:52
It's weird. I can hear it working but I can't see the pulse like with a TIG. Still? getting used to how it works. Was doing some fab work in the studio today, making a cutting jig for this new piece. You will see the video soon........

Good point. I am ...
By: kevincaron. on 09 Feb 12, 02:36:04
Good point. I am still smarting over that butt stomping.. I was just trying to add my 2 cents to the thread. Got jumped on for sure.. Oh well,? moving on......

Heck, you are only ...
By: kevincaron. on 09 Feb 12, 02:34:24
Heck, you are only 4 hours from Phoenix. Come on down for an over nighter. Spend a day with me and check? out the nightlife here in Phoenix...

I hear that! Wish ...
By: kevincaron. on 09 Feb 12, 02:33:19
I hear that! Wish I didn't. In talking with Simon,? the owner, he said that they are working on a retro fit for a thermostat for the fans. We should be able to just pop the cover and fix it ourselves. Not sure on the due date but they are listening.... I really like this unit. Does a nice job and is easy on the wallet. Thanks for posting.

you can sure? here ...
By: mustie1. on 09 Feb 12, 00:46:50
you can sure? here the difference

I got an everlast ...
By: TeacherPhilEnglish. on 08 Feb 12, 21:17:10
I got an everlast tig 185 micro? for $900, works real nice, easy to use

You are having? too ...
By: VisorBlue. on 08 Feb 12, 20:35:19
You are having? too much fun!

Great vids as ...
By: CBaughman. on 08 Feb 12, 19:04:15
Great vids as always....I saw? that nice bashing session from the "no it alls" on Weldingweb when you said your Longevity beats your Miller....It's funny how people think just because it's "Made in America", it's better....yet they probably drive a Honda Civic :o)

great vids.? wish ...
By: RCDriftChaser. on 08 Feb 12, 18:51:13
great vids.? wish you had a class in las vegas.

I've been looking ...
By: genghisman39. on 08 Feb 12, 18:50:39
I've been looking at the longevity welders? for a long time as a replacement for my $100 harbor freight el cheapo. I've heard good things about them, a little loud, but I can live with that.

Sometimes we don't ...
By: strube1369. on 08 Feb 12, 18:42:09
Sometimes we don't need no stinking? pulse...aaaaaaaaaaaand sometimes we do! Thanks guys. Good info, great presentation.

cool?
By: lawnguys2. on 08 Feb 12, 18:41:37
cool?

How to Use an Arc Weld : Basics of Shielded Metal Arc Welding
Posted by: expertvillage

Video duration: 151 seconds
Global video hits: 386986

Learn the basics of shielded arc welding from an arc welding expert in this free DIY video. Expert: Malcolm MacDonald Bio: Malcolm MacDonald graduated from Connestoga College in 1968 taking the Fitter Welding Program. Filmmaker: Melissa Schenk

Related: arc weld using safety, arc weld using tips, arc weld using & metal, arc weld using guide, arc weld using help, arc weld using, arc weld tips, arc weld guide, arc weld tools

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

"patching a? leaky ...
By: hitachi088. on 24 May 12, 03:24:53
"patching a? leaky top?", normal people normally use TAR and PAPER to repair a leaking roof.

wait what??
By: theflylice. on 24 May 12, 03:14:48
wait what??

tar and paper...?
By: hitachi088. on 23 May 12, 22:09:01
tar and paper...?

Está muy chulo !!!, ...
By: turman2000. on 17 May 12, 07:16:35
Está muy chulo !!!, por si te interesa tengo un vídeo de como soldar metal con? estaño, puedes verlo en mi canal... Un saludo

you can suck my ...
By: kristofer hoff. on 07 May 12, 19:58:05
you can suck my balls? you old ass nigguh

santa? gotta know ...
By: Remotedisaster. on 25 Apr 12, 03:38:22
santa? gotta know how to weld so he can make his big toys

SANTA!!!!!!!!!!!?
By: kingsms5977. on 21 Apr 12, 18:08:36
SANTA!!!!!!!!!!!?

looks like captain? ...
By: TheWelderman1962. on 08 Apr 12, 04:32:15
looks like captain? kangaroo.......wheres mr greenjeans ?

it would take years ...
By: TheWelderman1962. on 08 Apr 12, 04:19:12
it would take years to learn to? weld with this guy.......dots on a plate? WTF !

Could you arc weld ...
By: theflylice. on 13 Mar 12, 00:01:38
Could you arc weld something as thin as a shipping container? what current would you recommend? and what technique would you? use for say, patching a leaky top?

Every time I've ...
By: altpath. on 20 Feb 12, 01:01:48
Every time I've ever? needed something welded in Mexico, it's done like this except they use car jumper cables.

It's my? dad!
By: 5001pdw. on 08 Jan 12, 12:14:42
It's my? dad!

can u teach me fo ...
By: jugganutts. on 31 Oct 11, 17:49:11
can u teach me fo free tehe i have no money i want to make? mo money

LOL YEA?
By: hp11208. on 06 Oct 11, 22:20:16
LOL YEA?

No Jacian? it Chuck ...
By: kingmanny57. on 04 Oct 11, 23:04:55
No Jacian? it Chuck Norris.

240p WE MEET? AGAIN!
By: SmittysTuts. on 27 Sep 11, 00:44:23
240p WE MEET? AGAIN!

you guys are all ...
By: JacianDizzle23. on 02 Sep 11, 22:03:36
you guys are all wrong its? clearly santa clause :D

it's? ken bates :D
By: obi1jim. on 25 Aug 11, 14:20:05
it's? ken bates :D

Can? you see what ...
By: dagben77. on 15 Aug 11, 17:38:13
Can? you see what it is yet?

he says flux...?
By: cornershot94. on 18 Jul 11, 18:58:38
he says flux...?

this guy is better ...
By: 300pzl. on 26 May 11, 22:11:52
this guy is better than that autist man? with the other videos.

This guy I like - ...
By: daviddb. on 18 May 11, 08:58:19
This guy I like - he can teach simple folk like? me...:~}

ITS WILL SASSO? ...
By: thawholenine1. on 20 Apr 11, 00:39:00
ITS WILL SASSO? PLAYIN KENNY ROGERS

oh look! it's an ...
By: gamerknight96. on 09 Apr 11, 02:24:07
oh look! it's an instructional video? for the elves!

@lukemullinahone ...
By: G0H0GZ. on 04 Apr 11, 02:44:31
@lukemullinahone yes it can shock you,? if your gloves are wet, but usually only for the initial arc then the current passes through the metal instead of you. I speak from experience. Long hot days of sweat soaked gloves and getting a little jolt when I had to hold a piece to tack or having my knees on the metal while it's raining.

how to weld and cut with oxy acetylene hobby art welding ep.1 torch
Posted by: freddytk421

Video duration: 583 seconds
Global video hits: 112003

How to use the welding torch. episode 1 of my hobby art welding series. how to weld

Related: welding, cutting, torch, hobby, art, oxy, acetylene, cheap, gas, welder, filler, rod, tutorial

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

Excellent video? ...
By: ColtDeltaElite10mm. on 20 May 12, 18:41:12
Excellent video? thank you!

Excellent vid! ...
By: chevyhighrider. on 15 May 12, 02:36:32
Excellent vid! Whatever camera you used to focus in on the? Cutting Torch tip to show the Cones is crazy! What camera is it btw?

Dude that statue? ...
By: layin22s. on 09 May 12, 08:23:52
Dude that statue? is bad ass!

Welding is fun ...
By: BIGE5599. on 09 Apr 12, 07:52:35
Welding is fun stuff,I did it for 4 years in high school use to be really good at it built trailers? for the FFA at my school. This brigs back good memories!

on your torch, you ...
By: senoritoriver. on 07 Mar 12, 14:10:34
on your torch, you turn off the? oxygen first. on the tanks you turn off the acetylene first.

i believe your ...
By: jtabke11. on 29 Feb 12, 04:32:31
i believe your supposed to push the puddle? not pull it

I'm just starting ...
By: erutanl89. on 22 Feb 12, 05:31:32
I'm just starting out, and i found this video? very helpful.

thanks for all? the ...
By: leif011. on 17 Feb 12, 19:51:55
thanks for all? the tips. :)

lol I understand ...
By: carfenaticman123. on 16 Feb 12, 00:39:27
lol I understand man but thanks for making this video very helpful, I was welding my two coupons today at school and my torch was hissing at me like a fucker lol but I figured it out that it was? dirty. I kept adjusting to a neutral flame and to a oxidizing flame and couldn't figure it out why it was hissing for a few seconds lol

oh sorry it's just ...
By: freddytk421. on 15 Feb 12, 23:39:30
oh sorry it's just someone tells me every day that their teacher says to? turn it off the other way. I just tell them to read the manual.

Thanks but I didn't ...
By: carfenaticman123. on 15 Feb 12, 22:38:09
Thanks but I didn't say my teacher said anything, So I? dont get why you think hes a liar?

it will tell you ...
By: freddytk421. on 15 Feb 12, 20:55:02
it will tell you how to shut it down in the instruction? manual. different torches say different things. it really dosnt matter and you will not explode either way. If you are using a victor read the manual and then show it to your instructor and tell your teacher to stop telling people lies.

I can see you ...
By: carfenaticman123. on 14 Feb 12, 03:55:25
I can see you turned off your fuel first? and then the oxygen. At my school I turned off the oxygen first and then the fuel. Am I doing it the right way? Or does it even matter?

Nice Intro Vid. ...
By: TribalAlienGothic. on 12 Feb 12, 00:08:41
Nice Intro Vid. Thanks...?

thanks. i will ...
By: freddytk421. on 06 Feb 12, 01:15:21
thanks. i will start again soon and then keep? it up after that.

I dig your video. I ...
By: 315vock. on 05 Feb 12, 07:45:21
I dig your video. I just finished my winter session at school and it was on gas welding. I've been MIG welding for 6years now and never was taught to gas weld; its a slow? process like u said but its a cool way to know how to weld like the ole days. Keep up the good work.

Love? old school ...
By: RickM1953. on 03 Feb 12, 15:05:19
Love? old school welding...... Great video!

Question do u need ...
By: Kejinification. on 18 Jan 12, 01:08:53
Question do u need any kind of motion like a wip? or weave

nice video? very ...
By: trumpeteerxx. on 22 Dec 11, 00:13:59
nice video? very easy to understand and good camera work

thank you so much ...
By: 23solomon. on 19 Dec 11, 02:11:57
thank you so much for making a "make sense" video..? I appreciate it very much.

Very awesome. ...
By: brandonGCHACHU. on 08 Nov 11, 00:41:56
Very awesome. Beautiful artwork!?

yeah I sometimes ...
By: freddytk421. on 08 Oct 11, 05:16:36
yeah I sometimes make people mad with comments and also this video was when youtube had a star rating system so I guess it converted it to that. I never looked at that but it's still a good? ratio. I can't believe so many people watch these videos.

oh there are ...
By: lelard. on 08 Oct 11, 05:02:54
oh there are dislikes? hahaha thanks for the vid man... im just starting to learn how to? weld. i want to destroy my car the artist way:))

very? professional
By: dmacosta1. on 29 Sep 11, 01:20:56
very? professional

great video man, ...
By: MrMitchjos000. on 27 Sep 11, 04:20:00
great video man, very? helpful will be looking at what else you have.

Thermite weld
Posted by: oaksmodelrr

Video duration: 234 seconds
Global video hits: 294647

SEPTA Track department doing a thermite weld on rails in Lansdale PA

Related: septa, railroad, track, thermite, weld, rail

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

They don't do ...
By: MegaMouseSEC. on 03 May 12, 18:45:07
They don't do itlike this much anymore. Now? they have machines that do it safer.

I always wondered ...
By: ASLTheatre. on 02 May 12, 03:36:13
I always wondered where Thermite? welding is used.

Nope I didn't see ...
By: FrustratedBaboon. on 19 Apr 12, 19:25:10
Nope I didn't see any.?

You look like? you ...
By: Plan36c. on 19 Mar 12, 07:01:40
You look like? you hate your job

Thats too damn ...
By: CathleenJ64. on 01 Mar 12, 19:04:15
Thats too damn funny... I? seen it when I read your post..

OMG!! Did anyone ...
By: M4D5K1L2. on 26 Feb 12, 11:24:45
OMG!! Did anyone see the terrorist crossing the road? at 0:16

I like peanut? ...
By: 8091pinewood. on 23 Feb 12, 23:55:35
I like peanut? butter.

? or fireproof ...
By: mrkennethporter. on 19 Feb 12, 10:07:23
? or fireproof overalls. jokers.

This would be a ...
By: dhbiza. on 22 Dec 11, 18:18:48
This would be a MUCH better video of the technique of thermite welding if you had a girl with? BIG hooters in the video.

a little more meth ...
By: 5150ramjet. on 13 Dec 11, 15:10:22
a little more meth dudes??

thanks guys?
By: dunham161. on 04 Dec 11, 22:19:15
thanks guys?

DONT? GIVE THE ...
By: timpriddy73. on 08 Nov 11, 18:47:54
DONT? GIVE THE MUSLIM IDEAS

It's good to see ...
By: jakebeggy. on 25 Oct 11, 14:05:05
It's good to see such intelligent people are keeping our? railways intact.

Omg we found? ...
By: Darkdeathslayer01. on 23 Oct 11, 15:25:15
Omg we found? muhamids ghost!

Muslim at? 0:17 LOL.
By: Darko2625. on 21 Aug 11, 12:11:12
Muslim at? 0:17 LOL.

I saw a? muslim!!!! ...
By: TheEthug. on 07 Aug 11, 02:06:28
I saw a? muslim!!!!!!

part of the job.... ...
By: Churros714. on 03 Aug 11, 22:27:35
part of the job......? required lol

A Florida engineer, ...
By: punxsutawneybarney. on 01 Jun 11, 18:07:58
A Florida engineer, Jonathan Cole, recently demonstrated how to? use packaged thermite to cut steel girders, box columns, and bolts. See my video: Incendiary Experiments

because? of bird ...
By: zataflex. on 26 May 11, 20:22:10
because? of bird shitting

It's an in-situ ...
By: harley333man. on 08 May 11, 13:47:02
It's an in-situ casting process, with a 7/8" gap between the rails. The molten steel drops into the runner between the rail ends, and there are risers at each side? to let the air, slag etc. out. Because you need the metal to be above the rail head, you do get a lot of extra metal. You can see on the other rail where the top has been ground off to rail profile.

That's exactly the ...
By: gsbacorn. on 04 Apr 11, 22:47:02
That's exactly the way my Mom likes? it too!

My mom like's it " ...
By: signingupisretarded. on 04 Apr 11, 17:39:48
My mom like's it "roundhouse"? style.

I agree that it is ...
By: gsbacorn. on 04 Apr 11, 16:38:00
I agree that it is alot of time and people, all 4 of them, and all 4 minutes. No, fishplates are not that bad. But, no, there is no need for? thermal expansion. And for the final question, my Mom likes it just about the way yours does, ecept your Mom has an "outie" and she farts alot, but it is an improvement on her smell!

What exactly do you ...
By: signingupisretarded. on 04 Apr 11, 08:20:56
What exactly do you agree with? No claims where made. What advice? It's a series of questions. CWR? first appeared over 80 years after fishplates and are still in use. Which way does your mom prefer to get railed?

I agree. You can ...
By: gsbacorn. on 01 Apr 11, 02:18:58
I agree. You can weld them by hand in about 23 seconds. You may want to tell them how to do this, they have been doing it wrong for YEARS now. How often? do you hear of a railroad track breaking apart? They should take your advice.

How to Weld Two Plates - Kevin Caron
Posted by: kevincaron

Video duration: 638 seconds
Global video hits: 173146

From www.kevincaron.com - Based on a YouTube request, sculptor Kevin Caron shares how to weld two plates together using his TIG welder. He demonstrates how to chamfer the steel, then weld it together, all the while discussing voltage levels, electrodes and other cool welding minutiae.

Related: tig welding, tig welder, steel welding, sculpture, sculptor, kevin caron

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

Generally safety is ...
By: luvkountry. on 27 May 12, 13:12:30
Generally safety is the first issue that is discussed before doing any job. A hazard assessment of the actual job is done and appropriate safety measures and equipment are put into place including PPE...personal protective equipment. Covering the front of your neck is an area often over looked by welders. Tigging stainless will reflect the rays and cause exposed skin to burn. Attaching a soft leather bib to the lower part of? your shield will prevent this also hot flux from getting at your neck

Thanks, I am a lot ...
By: kevincaron. on 26 May 12, 14:21:21
Thanks, I am a lot smarter than? I was when I made this video. I don't weld with out the gear on anymore.

It has an extremely ...
By: luvkountry. on 26 May 12, 13:26:22
It has an extremely bright arc. The longer your bare skin is exposed to the arc rays the more severe your sunburn will be. Do not do any arc welding without proper personal? protective equipment.

Some processes ...
By: luvkountry. on 26 May 12, 13:25:06
Some processes generate a lot of? hot sparks..Shock hazard should be a consideration...The area surrounding your workplace should be free of combustables...In the case of this video you never do a welding process in a tee shirt...You may get a bad burn from accidentally coming in contact with the hot metal and last but not least be prepaired for a bad sunburn from the ultraviolet rays that are emitted from the process.. Continued

Hi, I viewed your ...
By: luvkountry. on 26 May 12, 13:23:15
Hi, I viewed your video with interest.. I wouldn't recommend welding without first taking into consideration the safety of the the individual doing the job..I know this? is a demonstration but thousands of unaware persons that may view this video will think that they too can do this process without using proper personal safety equipment..During the welding process a great deal of heat is generated. Continued..

Bevel the edges? ...
By: kevincaron. on 26 Apr 12, 00:46:02
Bevel the edges? out to about a 45 degree. Make the bevel about 1/2 inch deep. Lots of amps and start lay a root pass in the bottom. Then start filling the bevel and and finish with a wide cap on top. Or call me and we can talk about this. Sounds like a cool project but there may be a better way. My number is on my website..

Oh yeah, ill be arc ...
By: hdrjunkie. on 25 Apr 12, 19:33:32
Oh yeah, ill be arc welding if that makes? any difference.

how would you weld ...
By: hdrjunkie. on 25 Apr 12, 19:29:56
how would you weld say 3 pieces of 2" thick plate on top of one another so youd end up with a 6" thick block of steel? I wanna make an anvil, 18" tall but cant cut a? chunk of 6" thick plate to shape it but i can cut/shape 2" thick sheets then weld it solid so I have a 6" wide, 18" tall, solid block, shaped like an anvil. the horn is another issue for another time though..lol thanks!

That was my screw ...
By: kevincaron. on 19 Apr 12, 17:05:03
That was my screw up, I touched the? tungston to the puddle. I am not "that" steady. But thank you.

Thats? a great bit ...
By: ron1martens. on 19 Apr 12, 15:27:18
Thats? a great bit of filming well done camera person. You have very steady hand Kevin. I wonder why there was a glitch in the welding about half way through is that a drop of amps in the machine it happened on both occasions.

you have so? much ...
By: XXSinfulBeautyXX. on 24 Feb 12, 22:28:40
you have so? much under-cut and you should really use scott-bright to take off the copper on your filler metal

not bad, but you ...
By: derrick101100. on 24 Feb 12, 02:50:15
not bad, but you need to learn to dip you rod get your timing down.and make sure on your cover pass? there is no undercut. remember TIG welds are ment to be pretty

Yes, I can. I will ...
By: kevincaron. on 19 Feb 12, 22:08:32
Yes, I can. I will try to? put one together soon.. Thanks for the suggestion..

i would like to see ...
By: metalatreyu. on 19 Feb 12, 20:57:40
i would like to see a video some people can mig weld where it looks like a? tig and their great can you do this

First time I ran in ...
By: kevincaron. on 17 Feb 12, 23:01:10
First time I ran in to that I stopped and played with the arc for a while just to see what happens. Amazing what the magnets? can do. Thanks for posting....

its a good idea to? ...
By: toysoldier91ADDPS3. on 17 Feb 12, 19:56:19
its a good idea to? use a magnet but it messes up the arc sometimes if it takes awhile

Are you retarded? ...
By: TheDukeljk. on 14 Feb 12, 06:59:23
Are you retarded? You don't know a fucking thing? about welding.

awesome? video,
By: cpepe223. on 07 Feb 12, 02:29:45
awesome? video,

Haters will always ...
By: mifslim. on 03 Feb 12, 21:55:36
Haters will always hate. Good videos! Keep it? up.

I am sure we would? ...
By: kevincaron. on 03 Feb 12, 14:57:40
I am sure we would? all love to see some of your work. Sadly you have nothing posted on your channel...

Youtube does seem ...
By: deimos540. on 03 Feb 12, 00:43:30
Youtube does seem to? get some people alllll fired up!! Not sure why....

that is the worst ...
By: KongKingDK. on 02 Feb 12, 16:24:07
that is the worst welding? i have ever seen in my life... comming from a skilled blacksmith from denmark. ;)

ahhh some people on ...
By: blackriflex39. on 30 Jan 12, 18:02:57
ahhh some people on youtube are just idiots... dont know if its jealousy or ignorance but i see nothing wrong with? your weld.. awsome weld and nice bench...

Thanks for posting. ...
By: kevincaron. on 30 Jan 12, 15:08:26
Thanks for posting. Has you can see from the guy under you, some people? don't agree.

nicely done ?
By: blackriflex39. on 30 Jan 12, 08:07:29
nicely done ?

TIG Welding Technique - Kevin Caron
Posted by: kevincaron

Video duration: 293 seconds
Global video hits: 686473

From www.kevincaron.com - TIG welding offers a lot of advantages over MIG welding, arc and oxygen-acetylene welding. Artist Kevin Caron shows how he gets the most out of his TIG welder - and reveals some TIG welding tricks along the way.

Related: how to videos, free videos, tools, welders, welding

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

Thanks for taking ...
By: fire1130man. on 25 May 12, 14:10:26
Thanks for taking the? time.

Watch some of the ...
By: kevincaron. on 09 May 12, 02:09:25
Watch some of the newer videos, It? got bigger!!!

Clean your mill ...
By: 522design. on 08 May 12, 20:55:02
Clean your mill scale it helps to make the weld presentable ,less porosity , better prep=better weld !highly suggest gas lens ! Love your bench? it's massive !

I always brace my ...
By: kevincaron. on 23 Apr 12, 13:51:35
I always brace my hand with a finger to the metal. That's keeps? me from shaking to bad. Not sure what mirror welding is but for any type just more practice, practice and then practice some more. Don't give up or get discouraged. Everyone had to learn the first time.

i am terrible at ...
By: 41angelfire. on 23 Apr 12, 05:43:34
i am terrible at free handed welding cause they? wouldnt let me do it in school.and i am terrible at mirror welding.any tips on that please.

Good to hear back ...
By: justmeandapc. on 17 Apr 12, 08:03:11
Good to hear back from you Kevin, glad you liked the UK, cheers re the pint. I? hope to get a tig welder soon. All the best to Arizona.

I am in? sunny ...
By: kevincaron. on 15 Apr 12, 21:58:44
I am in? sunny Arizona. We are in the last of our great weather the the season. Sunny, clear and in the mid 70s. Later this week it should be in the 90s. Have a pint for us, we honeymooned in the UK. Loved it.

Thanks for the ...
By: justmeandapc. on 15 Apr 12, 21:36:49
Thanks for the tutorial, great video. Could? do with some of that Fla weather over here in the UK at the moment, barely 40f and North winds... Brrr

Thanks man. I think ...
By: MetalGuitarist294. on 13 Apr 12, 22:53:39
Thanks man. I think its funny to see how many youtubers think they know it all and don't have anything to back up their statements. Great? video man it helped out.

So nice to? see ...
By: kevincaron. on 13 Apr 12, 22:42:26
So nice to? see someone was awake in class. Thanks for posting

The tungsten tip ...
By: MetalGuitarist294. on 13 Apr 12, 21:42:03
The tungsten tip should not be pointy it should have a balled end or flat depending on what your welding. Even if you were to give it a sharp? point as soon as you weld it will melt down to a balled end.

You dont always ...
By: avelcrod. on 11 Apr 12, 00:54:19
You dont always time time for that. I live florida where it gets up to 115 degrees Fh by noon. Trust when I say that burning all the hairs? off your left arm is prefeable to a heat stroke.

Look at the date ...
By: kevincaron. on 08 Apr 12, 14:41:30
Look at the date this was posted my friend. Yes, I? was doing things back then that I shouldn't have. Yes, I do think Tig welding is easy to learn. No, I am no where as good as the guys that are trained to to this for a living. But I am really honored that you join YouTube for the first time yesterday and come here and tell me I don't know what I am talking about. May we see some of your work please? How about a video on your page showing us how to tig weld duplex stainless.

This is the first ...
By: ray foster. on 08 Apr 12, 02:24:06
This is the first time i have seen this video, did you forget about basic safety, arc rays and the damage they do to the skin, maybe you want to make another one with adequate protection on, as far? as being easy, you obviously havn't welded much duplex stainless or copper pipe, keep up the practice, let the professionals do the real work and the teaching.

u forgot to say ...
By: lsrrazermiaw. on 05 Apr 12, 13:51:27
u forgot to say that the tip of tig welding is very important to keep a point on it instead of flat:3 ur tip looked flat in video most likely or? stumpy :o

Thank you. I watch ...
By: kevincaron. on 04 Apr 12, 01:00:10
Thank you. I watch this now and think, Wow, I? learned so much since I made this video.

very helpful? video
By: TheBenjamin879. on 04 Apr 12, 00:42:24
very helpful? video

Not? as quick as ...
By: kevincaron. on 03 Apr 12, 13:40:09
Not? as quick as Mig but works just as well. Gives you more control in my opinion.

Is tig welding? ...
By: qaz179. on 03 Apr 12, 09:31:21
Is tig welding? suitable for building metal up . filling in. Good video btw.

I have no doubt ...
By: kevincaron. on 27 Mar 12, 14:25:53
I have no doubt that I have a lot to learn about welding in the real world. The kind of job where peoples lives are at stake are best left to the pros. But for what I do and the work I create I think I am doing just fine. Got a? lot more to learn and I will continue to do so for a long time yet.

Try TIG welding ...
By: davideirth. on 27 Mar 12, 12:08:49
Try TIG welding Aircraft? components and see how much off a fuck around it is, and how precise you have to be. Your really flying when your good at this.

check? my playlists ...
By: kevincaron. on 24 Mar 12, 12:10:06
check? my playlists..

could you link them ...
By: csrfc1873. on 23 Mar 12, 20:25:01
could you link them to me please, cheers?

I have done ...
By: kevincaron. on 13 Mar 12, 17:19:58
I have done several? stick videos. Check them out on my home page...

could you do a ...
By: joey120795. on 13 Mar 12, 15:13:32
could you do a video on how to run a stringer? bead on a stick welder

Tig Welding Pipe 6g Certification Test Techniques
Posted by: weldingtipsandtricks

Video duration: 287 seconds
Global video hits: 302807

www.weldingtipsandtr icks.com Technique for Tig Welding pipe in 6g position using a Tig Finger heat shield and slightly different technique for the Root pass. Welders from all over the world tell me how much they like the Tig Finger.

Related: tig welding technique, tig welding techniques, tig welding pipe, welding certification test, tig welding certification, pipe welding certification, tig root pass pipe, how to tig, how to tig weld steel, how to tig weld pipe

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

I don't know why so ...
By: romevenegas. on 25 May 12, 03:49:03
I don't know why so many people don't like this video??? It's not bad, there are always many techniques and hes showing? his. There is no specific way to welding! A true welder knows that and does what ever it takes to pass X-ray

It's a lot easier ...
By: Mlizar. on 22 May 12, 03:18:45
It's a lot easier to walk the cup. Don't have? to rest your hand on hot pipe.

do you bump your? ...
By: MrSoldier2011. on 19 May 12, 21:46:07
do you bump your? beads?

only down side for ...
By: MrSoldier2011. on 19 May 12, 21:43:59
only down side for me is i actually have to use preheat and interpass so? i go about 1/2 inch and have to let the pipe cool

this is good vid ...
By: MrSoldier2011. on 19 May 12, 21:43:09
this is good vid especially using the same hi freq tig torch i have? to at work to qualify.

Good job?
By: Lucca1249. on 19 May 12, 00:51:18
Good job?

@ ...
By: LucifersLapdog. on 17 May 12, 23:40:43
@ weldingtipsandtricks? - Thank you for the learning sir!

nasty lo? hi pass ...
By: mrat455. on 17 May 12, 04:49:23
nasty lo? hi pass next door

He only told you ...
By: BassSniperTV. on 15 May 12, 17:13:15
He only told you why like? 8 times in the video.

why u dnt? do the ...
By: topman minardo. on 12 May 12, 17:35:16
why u dnt? do the walking cap???

i use nickel rods ...
By: smackout. on 08 May 12, 11:40:06
i use nickel rods for cast iron welding. mostly reclaim work on machinery parts and engine blocks. the actual rod is quite easy to use and is quite similar to verticore MIG welding in that it cools quickly. it is a pain to pre heat and also if you cant keep heat on it and gradually bring the temp down.? i use kitty litter and shove the part in at least 4 - 6 inches under the surface of the kitty litter, leave it in there overnight.

what makes cast ...
By: knucklechukka. on 07 May 12, 04:05:26
what makes cast iron a bitch to weld is the fact you? must heat it before and after welding because the metal is not ideal for rapid cooling and heating ie welding not saying its impossible by a long shot but it is a certified pain in the ass and if you can remove it without too much heartache it is way better to DIY!!!

not on? carbon ...
By: knucklechukka. on 07 May 12, 03:56:30
not on? carbon stainless requires it for the root

not typically? a ...
By: knucklechukka. on 07 May 12, 03:55:22
not typically? a trick though is if you dont wanna scream down to your helper to wake him up put a dime landing on the bevel and youre able to run the same heat or pretty close to it as your hot pass but you better makesure your able to move quickly because qc dont like dog dicks

Dipping is bad. ...
By: ChristianGLong. on 05 May 12, 18:19:57
Dipping is bad. Oxidizes the fill rod.?

friend, why you ...
By: amococa1. on 04 May 12, 18:52:13
friend, why you didn't show us the root pass from the inside, that the most hard part, isn't we need to see a good penetration inside the pipe, i hope you post another video better with? the camera inside while you welding the root, thanks...

this is what we? ...
By: jarjarlol. on 29 Apr 12, 21:41:15
this is what we? would call a google translate to English fail.

wut?
By: GunnGuy69. on 24 Apr 12, 21:29:30
wut?

Friend, do not need ...
By: marcosguerreiroful. on 22 Apr 12, 21:35:08
Friend, do not need to make this move back and forth with tungtênio. The correct and swings it gently towards the muzzle clear. To one side and the ourtro so that the weld puddle is not present as the re-suck the video above. Thus, both? the weld pool as the internal password (root) will look better and with less chance of defects.

Do you do a forward ...
By: acompletedingas. on 22 Apr 12, 02:57:54
Do you do a forward and back motion on the upper part of the open butt, or do you finish it with walking the cup? I've been using a Lanthinated tungston. Do you recommend a different one? Thanks!!?

I do not pretend ...
By: marcosguerreiroful. on 22 Apr 12, 02:03:20
I do not pretend to? fix the videos of others. I'm not perfect, let alone the king of welding, however, there are more advanced techniques and better than those who are watching. If you are not prepared for criticism, take this shit from the air and look for a decent welding school to teach them to work!

Oh yes, of course. ...
By: marcosguerreiroful. on 22 Apr 12, 01:59:28
Oh yes, of course. Soon I'll post some videos to promote the correct method of TIG welding on pipes in 6G position to qualify procedures and welders. As for your question about my courage to post such a comment, mind you: he has no jurisdiction is not established! You and your videos are a disaster. It has a lot to learn. Incidentally, while I Pacoima - LA, I realized how poor the? welders are technically American. Have a good day.

For your ...
By: hyperluminalreality1. on 21 Apr 12, 06:40:14
For your information and education, there are many other welding videos with much worse technique here on Youtube for you to correct. The posters never even explain how the position is wrong due to camera angle, or that they like a protruding tungsten. Maybe you should go make the rounds and critique all the? worse videos out there. See ya back on this channel in a year or two...

You got balls to ...
By: FrustratedBaboon. on 20 Apr 12, 19:18:04
You got balls to post this comment. Lets your videos.?

Underwater Welding
Posted by: romeo2404

Video duration: 50 seconds
Global video hits: 501929

Welding underwater

Related: commercial, diving

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

Taping the rod ...
By: LTDanno360. on 18 May 12, 10:57:17
Taping the rod makes it ground and thus creating the electric arc? you can visably see in the video

how does hitting ...
By: Respectloyalty1. on 10 May 12, 17:20:45
how does hitting your rod with something ignite your torch?... BTW is that what caused his? torch to ignite?

@lionofjuddah. Nope ...
By: 000bubblehead000. on 12 Apr 12, 11:06:37
@lionofjuddah. Nope. I've been wet welding for over 5 years now, bro. Offshore, inshore, multiple codes, wet and dry. I never weld towards myself, because that's the hardest angle to see and control. I weld across myself (left to right usually) so I can see the weld pool properly. And 4mm isn't standard use all round. 3.2 for roots max, then 4mm for? hot passes. Loads of companies use 4mm for everything, but that's cause they're lazy and don't understand welding.

Saturation divers ...
By: lionOFjudah33. on 11 Apr 12, 13:48:52
Saturation divers make $200,000 a year. Commercial divers make $40,000-$90,0000. No one is strictly an underwater welder. You will be a commercial diver who does a variety of jobs. You'll weld when a welding job comes along. There are a lot of misconceptions about? the commercial diving industry on the internet.

When welding? ...
By: lionOFjudah33. on 11 Apr 12, 13:42:01
When welding? underwater you always go towards yourself. The bubbles prevent you from seeing your weld otherwise. 4mm (1/8") is standard for wet welding.

How i know, it's ...
By: Audrion3. on 29 Mar 12, 18:08:55
How i know, it's very very? good money for this job. I wish to do that :))

Ahhh i got? welders ...
By: 1GreatLake. on 25 Mar 12, 23:05:19
Ahhh i got? welders flash!

the suits are heavy ...
By: krunked666. on 25 Mar 12, 18:33:35
the suits are heavy enough that you sink. also you? can controll how much oxygen and shiz is in your suit so you can stay floating at a certain distance.

Lotos Tech? welding ...
By: bkkn2012. on 07 Mar 12, 17:39:44
Lotos Tech? welding machines are awesome

not? in marion in ...
By: taterheadkiley. on 25 Feb 12, 18:37:36
not? in marion in 8.75 a hour start at wiley metal.one dollar outfit

interesting. ? are ...
By: Ibringthetruth1. on 22 Feb 12, 07:29:23
interesting. ? are welds just as strong as in air?

an underwater ...
By: timberland1108. on 16 Feb 12, 04:12:26
an underwater welder can make up to? 200,000 a year

bad ass job?
By: 5990hay. on 16 Feb 12, 01:04:21
bad ass job?

Hey? cool never ...
By: youmakemeracist. on 09 Feb 12, 20:18:20
Hey? cool never seen that!! Thanks for posting!!

We welders make a ...
By: saunsoci34. on 08 Feb 12, 18:14:33
We welders make a good living no matter what? the fuck we're doing!

Screw this. I like ...
By: ColtDeltaElite10mm. on 16 Jan 12, 04:14:31
Screw this. I like my job the best. I? fly helicopters for shell oil. I fly to oil platforms at $145/hr. I'm a hobby welder yet professional pilot. Safer job and I'm always warm.

it is the best?
By: jesseorem17. on 09 Jan 12, 15:38:57
it is the best?

awesome!?
By: Lacey207280. on 31 Dec 11, 05:08:06
awesome!?

This guys only ...
By: 000bubblehead000. on 13 Dec 11, 10:32:44
This guys only practising. It's in a tank. He's not a welder, probably any early attempt. I can tell, 'cause I've been at underwater welding for 10 years! It's not a coding test? piece he's got there, it's def not a job, the earth clamps miles away on the bench with the piece not clamped or tacked down. He's welding towards himself, which most welders don't do too. Plus, that looks like a 4mm rod, which no-one would use for a root pass. Welding money's not bad, but the figures on here are wildly

hilarious ?
By: vivant97. on 13 Nov 11, 12:06:16
hilarious ?

Not that this isn't ...
By: SegaCD. on 08 Nov 11, 02:56:42
Not that this isn't cool to watch, but this looks like a serious pain in the ass. Last thing I would want during a weld is to start floating away from? it.

Really depends on ...
By: altaqqadum96. on 08 Nov 11, 02:00:03
Really depends on locale too.Read about the antarctic welder? who was making 900 an hour.

yes welding? ...
By: circusboy90210. on 31 Oct 11, 01:59:02
yes welding? contractors a tax deductible expense who work for $5k a day.

Yeah, because the ...
By: realvanman1. on 31 Oct 11, 01:54:48
Yeah, because the company get's the shit taxed out of it. And has little things? like, overheads...

nice clip. To bad ...
By: PUNTIGHOOFD. on 18 Oct 11, 17:11:10
nice clip. To bad tho that there was no welding screen in front of the camera, then you? would see the welding better...

Blacksmithing Forge-welding a branch
Posted by: MarkAspery

Video duration: 589 seconds
Global video hits: 129963

Forge-welding - lap and faggot welds Detail footage of weld and scarf

Related: blacksmith, forge, welding, blacksmithing, anvil

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

your getting way ...
By: 349duffman. on 19 Nov 11, 18:52:51
your getting way ahead of your self with swords. swords arent even fun to make and take a? good amount of time and effort. theres no point of swords in modern society today anyways.

You really make ...
By: Froddofromtheshire. on 01 Nov 11, 22:28:32
You really make welding? look easy.

5/8 round bar, ...
By: MarkAspery. on 26 Oct 11, 04:43:05
5/8 round bar, pointed and spread under the? power hammer. Cheers, Mark

How did you? make ...
By: bcboynb. on 26 Oct 11, 04:08:17
How did you? make the leaves?

Coke is my fuel of ...
By: MarkAspery. on 25 Oct 11, 02:45:00
Coke is my fuel of choice. I? use a side draft, side blast type of forge (UK style) Cheers, Mark

do you use gas or? ...
By: xxkittenkiller. on 25 Oct 11, 01:16:53
do you use gas or? coal?

I always thought ...
By: EvanAprhys. on 24 Oct 11, 07:43:18
I always thought propane would run out too fast? Charcoal, I hear, is pretty much just like coal, except it doesn't burn? as long or as hot, and makes a bit more? smoke. Honestly, it's just a bit better than wood.

''enter your text ...
By: TheDanielsweden. on 22 Oct 11, 18:50:02
''enter your text here'' fail? at 0,42

Your bellows should ...
By: tubeyou9878. on 12 Oct 11, 17:11:21
Your bellows should be able to blow? the loose cinders up in the air.

you'd probably want ...
By: tubeyou9878. on 12 Oct 11, 17:09:13
you'd probably want stainless? or hard steel and shape it slowly.

I used to work in ...
By: tubeyou9878. on 12 Oct 11, 17:07:58
I used to work in blacksmith shop. I loved it. We made oyster dredges for the Chesapeake Bay. I made a couple by myself. The only thing it's hot work.?

I've always been ...
By: 230Bigpapi. on 06 Oct 11, 21:37:47
I've always been interested in blacksmith since I was? 9. What would I need to make swords?

Is a? propane forge ...
By: Bookstop1337. on 23 Sep 11, 07:01:36
Is a? propane forge expensive? How hard is it to assemble? What are the regulations and laws for owning one?

I use a propane ...
By: BackWoodsPuppy. on 17 Sep 11, 05:32:34
I use a propane forge at? home, the blacksmith place I go to (CBA) uses coal, which is burned off to make coke. Never tried charcoal :p

Haha, I don't event ...
By: EvanAprhys. on 16 Sep 11, 00:39:54
Haha, I don't event got coal... using charcoal...? Where do you get your stuff?

Are you using good ...
By: BackWoodsPuppy. on 15 Sep 11, 23:27:28
Are you using good coke? Also, make sure your bellows can blow quite? hard.

Hi, I am trying to ...
By: EvanAprhys. on 12 Sep 11, 20:02:42
Hi, I am trying to teach myself to blacksmith. I am having trouble getting it hot enough to make the metal that hot (even with my bellows) as to? forge weld, so my question is, how do you get it that hot?

from what I have ...
By: offenwrong. on 16 Aug 11, 14:07:24
from what I have seen alot of people are self trained as hobbiests...another site you might try is Purgatory ironworks here on Youtube I have it? on my channel if you wanna just skim over...he gives some instruction at first but then goes into large projects way out of my range....good luck.

Thanks for the demo ...
By: offenwrong. on 16 Aug 11, 14:02:28
Thanks for the demo....I keep trying to? over complicate it in my head, so I have accomplished nothing so far....I see your flux was Borax?....thanks for video.

How come its? never ...
By: Breathor. on 13 Aug 11, 20:57:59
How come its? never that easy for me >:\

Quite correct! ...
By: MarkAspery. on 11 Aug 11, 14:39:49
Quite correct! Anything that stops the two,clean, metals surfaces from? making contact with each other. Cheers, Mark

i was wondering is? ...
By: Midnighter169. on 10 Aug 11, 19:14:17
i was wondering is? it impurities that keep welds apart?

Watch this video ...
By: jedicharls. on 25 Jul 11, 18:24:37
Watch this video while listening to Nero's dubstep symphony... epicocity.?

you look like u ...
By: aussiekids13. on 29 Jun 11, 11:04:19
you look like u making a? crow bar

How to MIG Weld : Removing a Broken Stud for MIG Welding
Posted by: expertvillage

Video duration: 145 seconds
Global video hits: 58342

If you have to remove a broken stud for your MIG welding project, our expert is here to teach you with tips and techniques in this free welding video clip. Expert: Mike Rogers Bio: Mike Rogers has over 30 years of welding experience. He was initially trained by haulage construction company Crane Fruehauf. Filmmaker: Anthony Rutland

Related: mig welding tips, mig welding help, mig welding lesson, mig welding guide, mig welding advice, mig welding techniques, use a mig welder, welding & mig welding

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

Thanks?
By: Mitchumthegreat. on 09 Dec 11, 02:41:12
Thanks?

why wont the nut? ...
By: gujada9776. on 19 Jul 11, 03:04:11
why wont the nut? hold on to the bolt when i weld i get chery red but the weld brakes its acting like its not sticking very good im using a canadian tire flux core wire welder pls help

im with you bro ... ...
By: beckenheim101. on 16 Jul 11, 22:17:17
im with you bro ... i have some auto helmets too, but most often i use an oldschool helmet ...? back to the roots ;o)

awesome? tip thank ...
By: ethanwhite117. on 30 Jun 11, 01:13:22
awesome? tip thank you!!!

nice?
By: angrygunsmith. on 15 Jun 11, 08:09:58
nice?

That is a proper ...
By: muddymike0. on 31 May 11, 13:50:22
That is a proper face mask! I have an automatic helmet one and its wonderful in many situations. I just decided to show the old hand held is absolutely fine for small/DIY welding jobs, and no I have never suffered burning when using one. You don't have to buy expensive kit. I set the welder hotter than normal to get more heat onto? the stud, the heat helps free any rust etc, its not just a case of welding on a nut to get a grip on. This works well, particularly in confined spaces.

Wow, that's me! I ...
By: muddymike0. on 31 May 11, 13:36:47
Wow, that's me! I had no idea this would end up on You Tube, let alone with so many hits. The original when posted on Expert Village was accompanied by some text that gave a little more information. I was asked by a student friend of my son if he could film me welding for a project he was doing. In tricky locations I have used a copper washer placed (even glued first) over the hole to protect the aperture. Then? weld the nut, or even a piece of flat steel bar with a suitable hole drilled in it.

I think you should ...
By: cgis123. on 10 Apr 11, 18:20:50
I think you should concentrate on getting a proper face mask before giving advice, And when giving the advice you? need to point out the pro's and the con's, What you have just demonstrated could have the potential to do more harm than good.

Good tip.?
By: MathiasKure. on 23 Mar 11, 20:25:11
Good tip.?

All you have to ...
By: bryanholland7. on 18 Mar 11, 22:18:37
All you have to worry about is if the shaft is further inside is that you dont arc off of the threads. you have to use stick to do this process. because the flux like what was posted from someone else. mig can be used to extract it if its flush because mig has slag but not enough to protect the threads. Yes it does contract but when it cools down it constricts to less than 1/72 of the size. Mig welds when you? push a button, stick welds when you make contact so becareful you only touch the shaft

yes aluminum has a ...
By: bryanholland7. on 18 Mar 11, 22:02:48
yes aluminum has a higher thermal heat conductivity which means that? heat travels faster through aluminum. but since this process is so fast it shouldn't travel fast enough to damage any internal parts like cast iron crome or machined parts. one thing that i would mention though is that if this doesn't work you would have to use a helicoil and helicoils are aluminum. no problem installing helicoils in a cast but when you install them in aluminum those threads are really fragile.

yes its ok just ...
By: bryanholland7. on 18 Mar 11, 21:56:18
yes its ok just remember to give it enough time to cool down before torquing down on that bolt, so you don't strip those threads the block will cool faster than the bolt.? You could also use a stick but its a little trickier vs mig, because you don't want to make contact with the nut before the broken bolt shaft. Mig sets it to weld when you push a button, stick is active once you touch it. Also the nut has to be large enough for the stick to fit inside the hole of the nut.

if its aluminum you ...
By: bryanholland7. on 18 Mar 11, 21:31:55
if its aluminum you use an aluminum mig or you? can use tig. If your not that fortunate. You can also buy aluminum rods for your stick welder. The only thing you have to worry about with using stick to do the same process is that the nut hole has to be large enough to fit the rod through to arc off of the bolt shaft that's broken. Formal USA MetalWorker

Exalent, good ? ...
By: judge6754. on 05 Mar 11, 14:54:55
Exalent, good ? vedio.

Did you see how red ...
By: vistigioful. on 05 Mar 11, 00:24:43
Did you see how red that? square nut got - DAMN.

ingenioso.gracias ...
By: payseismuertos. on 10 Feb 11, 03:06:27
ingenioso.gracias tan facil pero? nunca se me huviera ocurrido...

I install carrier? ...
By: 5thcorps. on 07 Feb 11, 21:29:02
I install carrier? brngs by heating them so they will expand then they slip right on. Talk to any mechanic they'll tell you the same. I tis the rapid cooling that loosens the bolt

heat up a spring ...
By: XxMafiaSoljaxX. on 03 Feb 11, 22:29:49
heat up a spring and it will shrink tight...thats why when you heat up the broken? bolt it will break loose and come out nicely.

heat swells? steel
By: 5thcorps. on 03 Feb 11, 22:03:13
heat swells? steel

?
By: 5thcorps. on 03 Feb 11, 22:03:04
?

I like the ...
By: spelunkerd. on 25 Jan 11, 02:58:32
I like the technique described below by flatlandwelder. A washer also helps to prevent the weld from spilling across to the frame, which of course you don't want. I would worry about overheating if the frame is aluminum.?

You have the basic ...
By: flatlandwelder. on 21 Jan 11, 00:05:24
You have the basic idea, but not the best method. First weld a washer onto the stud, then weld a nut onto the washer. Once that's done work the nut back and forth a few times to help clean out the threads before removing the stud. This system works more times than? your way. Yes, its a couple more steps, but works better than you system and there is less chance of destroying the threads.

What? if the steel ...
By: TRcustomengineering. on 28 Nov 10, 15:25:04
What? if the steel bolt is in a aluminum engine block? Will this still work fine?

Thanks?
By: Mitchumthegreat. on 09 Dec 11, 02:41:12
Thanks?

why wont the nut ...
By: gujada9776. on 19 Jul 11, 03:04:11
why wont the nut hold on to the bolt when i weld i get chery red? but the weld brakes its acting like its not sticking very good im using a canadian tire flux core wire welder pls help

Welding Basics: Techniques for Tig, Mig & Arc Welds : What is Tig Welding?
Posted by: expertvillage

Video duration: 94 seconds
Global video hits: 347135

Learn what tig welding is from an expert in arc, tig and mig welding in this free DIY video. Expert: Malcolm MacDonald Bio: Malcolm MacDonald graduated from Connestoga College in 1968 taking the Fitter Welding Program. Filmmaker: Melissa Schenk

Related: diy, tig, mig, arc, welding, ironwork

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

great video. does ...
By: zion shen. on 12 May 12, 01:25:15
great video. does any one try amazon MOSAIC Lotos LTPDC2000, looks it has? great review.

Thank you for ...
By: millerxmt304forsale. on 11 Jan 12, 06:48:07
Thank you for teaching?

good? job
By: chapiselenano. on 04 Nov 11, 17:59:22
good? job

look harder and ...
By: Mrtrogerty. on 23 Sep 11, 21:18:17
look harder and stop? making excuses

"nukular"?
By: pathan92. on 03 Sep 11, 02:03:58
"nukular"?

Are ... you still? ...
By: Falih123. on 23 Jun 11, 00:40:30
Are ... you still? alive.. in 2011? COme on Teach me In 2011...

probably but metal ...
By: rc8rsracer. on 23 Apr 11, 01:04:18
probably but metal seems to be more fluid than liquid glass but its easy? once you get used to it

who is sick of ...
By: bcott28. on 19 Mar 11, 03:13:54
who is sick of commercials? if we wanted? to see them wed stick with cable!

Lotos CT520D: 50A ...
By: mike20111111. on 21 Feb 11, 22:04:00
Lotos CT520D: 50A Plasma Cutter /200 A Tig/ 200 A Stick Welder Combo If you like it, add this magic code : mike-youtube to? our website uwelding.com you will get 8% discount special price: $644!!!!!!!!!! contact us Tel: (408)642-4864 Email: mike@uwelding.com

Hello, I enjoyed ...
By: intltrade09. on 03 Feb 11, 00:03:49
Hello, I enjoyed watching your video. I am also a welder but, it's different type of welding. We're using quartz glass and we're also dark? glasses or dark helmets. we used glass rods for welding using our two to three fingers to run the rods. this type of materials? or parts are using in the silcon valley and using Hyrogen and oxygen. I have a 20 plus working experinces. Do you think i can adopt my skill to this type of skill? Thank you.

Hello, I enjoyed ...
By: intltrade09. on 03 Feb 11, 00:02:38
Hello, I enjoyed watching your video. I am also a welder but, it's different type of welding. We're using quartz glass and we're also dark glasses or dark helmets. we used glass rods for welding using our two to three fingers to run the rods. this type of materrals? or parts are using in the silcon? valley. I have a 20 plus working experinces. Do you think i can adopt my skill to this type of skill? Thank you.

Its like hes trying ...
By: madcb2382. on 07 Jan 11, 01:45:40
Its like hes trying to read something as hes talking.?

hey check out my ...
By: wunderman1234. on 21 Dec 10, 15:10:48
hey check out my channel for some cool welding? videos and an unboxing of my lioncoln pro mig 180

...
By: williamodling. on 08 Dec 10, 21:08:50
globalweldingservices? dot co dot uk

easy? to use my ass
By: flyingdingoIV. on 08 Nov 10, 23:22:09
easy? to use my ass

"Alumium" was the ...
By: teddyvamp. on 05 Aug 10, 15:43:06
"Alumium" was the original term as set forth by Humphry Davy, though he later changed this to "aluminum". Your proposed "correction" of? "aluminium" came from a carping, petty prig more content to harp on trivial matters than establish any landmark contributions. I suppose you can relate.

santa welding :D?
By: konecsvedomi. on 25 Jul 10, 09:03:15
santa welding :D?

"EASY? TO USED!"
By: TC1OZ. on 09 Jul 10, 07:06:55
"EASY? TO USED!"

i fukn recon?
By: chrisross2343. on 04 Jun 10, 08:34:15
i fukn recon?

In America, they ...
By: littlestworkshop. on 29 May 10, 14:26:16
In America, they spell? it and pronounce it differently.

Did you say AL-UM- ...
By: MrShakesFist. on 16 May 10, 05:25:06
Did you say AL-UM-IN-UM? That? is not right. "AL-UM-IN-I-UM" Is that too difficult?

good info on your ...
By: bubblehead420. on 20 Mar 10, 22:13:44
good info on your vid. but tig? is not so easy. mig is easy. practice makes perfect. most peoples problem is they dont know what gas to use... argon or helium mix? helium mix sems to work best for aluminum, pure argon for most everything else.

Good info on TIG. ...
By: zansurex. on 10 Mar 10, 22:15:53
Good info on TIG. Search brazilwelds to see tig through the lens. good series of vids and info.?

Very usefull!?
By: XXX414141. on 04 Mar 10, 17:36:27
Very usefull!?

sir,cn i ask what? ...
By: bobb27ful. on 10 Feb 10, 14:07:58
sir,cn i ask what? are the BLUE PRINT? thank`s im new in weldeng i want to know more about weldeng thank` a lot and more power!!!

MIG Welding Principles
Posted by: nielsmiller

Video duration: 198 seconds
Global video hits: 189890

Principles, procedures, and techniques. What happens at the MIG arc? Identifies weld equipment and setup before welding. For more information on Miller's line of MIG welders, visit bit.ly

Related: mig, welding, weld, welder, miller, gmaw

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

I have just started ...
By: 94AggressiveInline. on 14 Apr 12, 11:48:13
I have just started a welding course and was wondering, if you take longer on the weld will that give? you better penetration? my welds look good but we havent checked them for defaults yet so is there any way to tell before testing -Thanks

alright, thx. will ...
By: Koba4329. on 26 Nov 11, 17:56:24
alright, thx. will try that. was gettin conflicting stories here but that cleared? it up. thx

oh and also if you ...
By: tar21gi. on 26 Nov 11, 17:54:39
oh and also if you get porosity you? might need to turn up the pressure on your shielding gas, btw I forgot to set my last response as a reply

When you pull/drag, ...
By: tar21gi. on 26 Nov 11, 17:53:17
When you pull/drag, where is your gun pointing? It's pointing back at the puddle/weld, which is where the argon/co2 gas is being sprayed at. So yes you can get adequate gas coverage either way, the problem is when your gun angle is too severe, but that can happen with either push or pull, and thats when you can get porosity. If you find yourself getting porosity often, you should straighten your angle a little bit, clean your gun and the metal you're welding on.?

sorry perocity* ?
By: Koba4329. on 25 Nov 11, 21:14:37
sorry perocity* ?

i was always told ...
By: Koba4329. on 25 Nov 11, 21:08:25
i was always told that when you pull the argon gas doesn't surround or get trapped around the weld which makes it less strong/less penetration and can cause verocity? which isn't even a weld, just makes bubbles and just a completely hollow weld that isn't at all strong. is that true? or just bull?

You can push or ...
By: tar21gi. on 25 Nov 11, 03:24:01
You can push or pull with a MIG welder. When you? pull with MIG you get deeper penetration, however the weld profile isn't as nice. When you push you don't get quite as much penetration, but obviously you get a much better profile. So it all depends on the job, and the finish required, but either work.

k im getting ...
By: Koba4329. on 19 Nov 11, 05:26:13
k im getting conflicting stories here. im young and learning how to weld from a old pro. he tells me "push a wire, pull a rod" cause when you? pull on a wire the gas doesn't stay long enough on the weld for it to seel properly so you get verosity. is that true or is this video true?

we not have Idiot ...
By: lassehoei. on 14 Nov 11, 10:43:40
we not have Idiot stores were i live but i got some? from my friend

That last? weld was ...
By: terminator363. on 05 Oct 11, 04:31:21
That last? weld was amazing.

Nice looking? weld ...
By: rottweilerdog10. on 27 Aug 11, 09:43:17
Nice looking? weld at the end there

@3:05 That? weld ...
By: DAQUAN88. on 03 May 11, 14:07:28
@3:05 That? weld had to be the display model!!!!!!!!!!!Dam

what the hell.. i ...
By: willystylee. on 09 Apr 11, 08:17:08
what the hell.. i never even said this.... o.O?

could you discuss ...
By: tsraina. on 12 Dec 10, 04:03:06
could you discuss multi pass welding and whats the best welder for weldng? space frames using 0.120 chrome molly or mild steel.it for my race car/weekend fun car. I just bought a chicago mig flux core 90amp that says it can weld 3/8 on a single pass thanks in advance what a way to test for weld strength I will need in a space frame on chrome molly/mild steel 0.120 tube.its for my tube chassis in my race car/super luxury car.

i lol'd at? "for a ...
By: monk1junk1. on 28 Nov 10, 05:05:30
i lol'd at? "for a deeper penetraition"

@gownozjad3, it is ...
By: kd5gua. on 23 Aug 10, 21:52:46
@gownozjad3, it is hard to examine many types of weld joints to determine what type of penetration you are getting without destructive investigation. Got to cut it open to view it. Do some practice welds are pieces that are narrow enough that you can take welded assembly over to your cut off saw and cut off some well back into the weld. This is the best and maybe only way to see what kind of penetration you are getting, other than being able to do an x-ray of weld. ?

This is not true. ...
By: Tehtog. on 26 Jun 10, 12:46:02
This is not true. The computer screen cannot reach the? dangerous levels of light. Although you're spot on. A good visor is key.

love? the epic ...
By: danjo7802. on 24 May 10, 10:24:30
love? the epic guitar

Hey whats the name ...
By: DrewSimmers. on 29 Apr 10, 04:42:50
Hey whats the name of the song? playing in the background?

no?
By: bozzza69. on 10 Apr 10, 03:50:21
no?

O M F G!!? what can ...
By: SthealthRaider. on 01 Apr 10, 14:44:49
O M F G!!? what can pc arc burn mah eyes?!?!!? OMGH I WATCHED LIKE 1000 hours of welding vids..... WTF

that weld? was ...
By: MilleniumYT1300. on 11 Mar 10, 20:09:13
that weld? was beautiful it almost looked like tig!

I was looking for ...
By: stevebigler. on 12 Jan 10, 18:58:22
I was looking for the idiot store, but I? could not remember the number for 411.

Have you guys seen ...
By: 3blindmicefilms. on 30 Nov 09, 15:55:28
Have you guys seen "You Can't Weld This!"? It's pretty funny... The guys over? at WeldingMart com had it made! Do a youtube search for it :)

rofl makes me feel ...
By: elliotmotoX. on 09 Nov 09, 10:59:32
rofl makes me feel so dumb?

Arc Welding Tips For Beginning Welders : Running a Bead of Weld When Arc Welding
Posted by: expertvillage

Video duration: 82 seconds
Global video hits: 654895

Tips on how to run a bead of weld to improve your welding techniques in this free DIY video for beginners. Expert: teacherjon Bio: Jon holds a Bachelors of Science in Education and Human Sciences degree, with an endorsement in Industrial Technology Education from the University of Nebraska in Lincoln. Filmmaker: Jon Olson

Related: arc welding safety, arc welding tips, arc welding basics, arc welding help, arc welding guide, beginners arc welding, arc welding beginners

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

nigguah u? suck
By: kristofer hoff. on 15 May 12, 20:44:21
nigguah u? suck

no body likes your ...
By: kristofer hoff. on 07 May 12, 20:03:12
no body likes your skinny ass craka ass hoe ass so shut yo cock mouth? up

that is expire way?
By: mrlight01. on 04 May 12, 20:43:59
that is expire way?

That guy looks like ...
By: b2major9th. on 27 Apr 12, 06:45:43
That guy looks like some kind of robot. Get the? Steve Bleile videos if you really want to learn arc welding.

he looks scared as ...
By: hdrjunkie. on 25 Apr 12, 19:21:38
he looks scared as hell...lol cmon man,? its not that bad. Lighten up! lol

demostration make ...
By: TheJordano45. on 22 Apr 12, 15:15:25
demostration make for glass? dark and welding

Two hands welding? ...
By: nathanfivetwentysix. on 11 Apr 12, 00:56:46
Two hands welding? owwsss, just demo baseball instead not expert village... ?

Discuss Stringer ...
By: nathanfivetwentysix. on 11 Apr 12, 00:54:16
Discuss Stringer Bead first, weaving motion later...?

A welding learning ...
By: WXIIIR. on 23 Mar 12, 03:35:28
A welding learning video with no? welding

Hey john if? you ...
By: superhawkn. on 16 Mar 12, 22:26:02
Hey john if? you have more fun doing videos maybe get some bikini babes to join as helpers would be more fun.

robot?
By: itagkinuday23. on 13 Mar 12, 15:14:10
robot?

is? this guy the ...
By: TheRealestEver. on 09 Mar 12, 08:42:31
is? this guy the expert village idiot?

when you finish ...
By: kaumiit2. on 25 Feb 12, 04:53:52
when you finish welding its best to shove it under? your sweaty armpits ,to remove welding gloves

"In this video clip ...
By: MrChosenmarine. on 18 Feb 12, 20:47:09
"In this video clip, I will be? discussing..." *face palm*

Noooh!Ukraine? and ...
By: MrThirteen09. on 11 Feb 12, 08:12:02
Noooh!Ukraine? and proud of meself ungh!

You've played this ...
By: turkiq. on 05 Feb 12, 10:33:26
You've played this clip to learn something, haven't you? So I think you should respect this man as he prepared? this clip. Thanks John, keep it up.

should of welded ...
By: RoughNeckRage. on 31 Jan 12, 17:00:07
should of welded your toaster before you started recording with it?

See my channel? for ...
By: TheLightningStalker. on 31 Jan 12, 06:08:04
See my channel? for video response, "Hi This is John"

ROFL? hence the ...
By: jtothed95. on 25 Jan 12, 09:43:38
ROFL? hence the ENGLISH in the vid

0-15 degrees ...
By: militiamike666. on 21 Jan 12, 02:16:59
0-15 degrees backhand inclanation.? to much back hand inclanation and rideing the crucible will increase voltage resulting in less penetration

WRONG!?
By: ado591. on 19 Jan 12, 03:24:33
WRONG!?

TWO HANDS?....? ...
By: Biasetsky. on 06 Jan 12, 05:16:12
TWO HANDS?....? GOOD LUCK PIPELINING, must be AMERICAN......LOL

Why two hands???
By: melloman93. on 06 Jan 12, 02:21:37
Why two hands???

^ a? tool x)
By: drummer1533. on 29 Dec 11, 08:03:24
^ a? tool x)

Is he Mr. Rogers? ...
By: TheSmatts. on 28 Dec 11, 15:38:18
Is he Mr. Rogers? grandson?

Forge Welding - 1904
Posted by: rchaos00001

Video duration: 170 seconds
Global video hits: 75756

A group of industrial blacksmiths forge weld a large ring for westinghouse.

Related: blacksmith, forge, weld, westinghouse.

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

If you're speaking ...
By: Spearfisher1970. on 11 Jan 12, 13:01:25
If you're speaking of the guy working the chain, I disagree. He uses his body weight to reduce arm /? lat strain to lift it (you use what you can to your advantage when laboring all day), and when lowering it he's obviously not exaggerating, and expert at it - witness how he catches the chain to stop it without looking for it. I guess many will never know as most of this country is too civilized to ever experience hard labor.

thees men work as ...
By: svartsot. on 03 Jul 11, 12:42:50
thees men work as one, fasinating! ?

So? true! its the ...
By: svartsot. on 03 Jul 11, 12:40:21
So? true! its the same with me:)

these? guys were ...
By: blacksmither1. on 28 Mar 11, 20:17:59
these? guys were huge!

on the contrary, ...
By: ppallk. on 21 Feb 11, 03:08:40
on the contrary, there are melting involved which is happening in the video in the 1st minute with the ring heated on the fire, and hence residual stresses are imminent, including which from workers hitting the weld site; ie compression force to surface inwards to centre of the weld site, not speaking how they scrap off any flush from deformation of the surface, reducing? volume density of the metal present at weld spot. Remarkable video showing what's going on in that era though.

if did that today ...
By: spark300c. on 21 Feb 11, 02:57:48
if did that today they would heat with? oxyflames and then put it in big press and be done in less time it took in 1904

there? is no ...
By: spark300c. on 21 Feb 11, 02:55:59
there? is no melting involved in forging there fore there are less residual stresses.

Your right. Its a? ...
By: obeyance. on 18 Jan 11, 03:20:49
Your right. Its a? chain fall.

I know what he's ...
By: sthompson1000. on 14 Jan 11, 13:00:11
I know what he's doing, it's? not bellows, its a block and tackle. I'm only implying that his exaggerated movements suggest a certain self-consciousness.

that is incorrect ...
By: modernblacksmith. on 14 Jan 11, 00:58:50
that is incorrect he's working the chain falls it's a chain powered winch that lifts the larger? chain

he's working the ...
By: modernblacksmith. on 14 Jan 11, 00:57:46
he's working the chain falls.? that's how he lifts it.

iron muscle!?
By: herberticuz. on 14 Nov 10, 14:12:44
iron muscle!?

That would be shit. ...
By: calmackie. on 30 Jul 10, 14:40:03
That would be shit. I love working with waitresses and I love sleeping with them even more. I need to work with? women

Maybe but... have ...
By: obeyance. on 18 Jul 10, 23:57:44
Maybe but... have you ever pulled a chain that worked bellows? Hes putting his weight into each pull and even though he looks like hes showing off, hes really? doing his job correctly and efficiently. *shrug*

real men! doing ...
By: prokopto. on 23 Jun 10, 19:31:18
real men! doing real honest hard work. I bet most of us coul not swing those big hammers more than a dozen times before we? collapsed!

Maybe if work was ...
By: bigDbigDbigD. on 03 Jun 10, 10:30:21
Maybe if work was still done? this way there would be no women in the work force.

The bloke pulling? ...
By: sthompson1000. on 13 Feb 10, 21:17:29
The bloke pulling? the chain at about 1min certainly knew he was being filmed!

wow. any miss with ...
By: dorisdrew. on 05 Feb 10, 21:28:44
wow. any miss with the hammer obliterates the man next to you. i? guess you didn't miss.

but? they die as ...
By: joltzkrieg. on 20 Jan 10, 22:21:34
but? they die as pussies

Good? point.
By: calmackie. on 06 Nov 09, 01:47:03
Good? point.

Yes,? but modern ...
By: Haumiblau01. on 04 Nov 09, 22:36:51
Yes,? but modern men don't die at the age of 50

Wow, they sure? ...
By: calmackie. on 19 Oct 09, 16:50:42
Wow, they sure? make modern men look like pussies.

The? ancients ...
By: kaxitaksi. on 23 Aug 09, 07:53:24
The? ancients making the first stargate? ;)

lol.....very true!! ...
By: sw8741. on 03 Aug 09, 15:35:54
lol.....very true!! but you forgot a few....gay/lesbian, transgender, "he/she", and a few others i can't remember now. i'm? sure the eeoc has a few regulations concerning that.

You have no idea ...
By: southshoersmith. on 08 Jun 09, 01:00:43
You have no idea what you are talking about. A forge weld is as good as if not better than any welding? process. It is just too much work to be profitable in industry these days.

Jane Fonda Tuesday Weld Anthony Perkins Rock Hudson Lauren Bacall Natalie Wood Judy Garland 1965
Posted by: soapbxprod

Video duration: 375 seconds
Global video hits: 30688

Jane Fonda Tuesday Weld Anthony Perkins Rock Hudson David Selznick Lauren Bacall Ben Gazzara Suzanne Pleshette Gladys Cooper Judy Garland Polly Bergen Natalie Wood Dominick Dunne George Axelrod Stewart Stern Elliot Kastner Serena Stewart Tom Tryon Tom Mankiewicz May 31, 1965. Silent home movies given to me personally by Roddy McDowall.

Related: tom mankiewicz

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

You? are most ...
By: soapbxprod. on 16 May 12, 12:46:18
You? are most welcome- there is about an hour of footage uploaded as well as an offline assembly titled Hollywood 1965. Hope you enjoy it. :)

Thank? you! Danke! ...
By: soapbxprod. on 16 May 12, 12:44:54
Thank? you! Danke! And best wishes to you in Germany. :)

My gosh this is so ...
By: born2lateboohoo. on 15 May 12, 09:18:16
My gosh this is so amazing to see all these incredible stars and legends all hanging out. My GOD I wish I was at that party. Anybody have a time machine? Thank you so? much for sharing this with us!!

Cool stuff, hughs ...
By: VeronaRot. on 14 May 12, 09:45:21
Cool stuff, hughs from? Germany!

That's exactly ...
By: soapbxprod. on 04 May 12, 18:49:16
That's exactly right! Lauren Bacall says the same in one? of our clips...

I? think Tony ...
By: miladymell. on 04 May 12, 07:06:56
I? think Tony Perkins was mouthing "F(*& You" to the camera. Love it!

Natalie's still my? ...
By: soapbxprod. on 02 May 12, 11:24:32
Natalie's still my? absolute favorite...

Affirmative!?
By: soapbxprod. on 02 May 12, 11:24:15
Affirmative!?

That's was Judy? ...
By: Stefanie0621. on 01 May 12, 14:55:30
That's was Judy? talking to Lauren Bacall right? Love them both!

I love Judy Garland ...
By: Stefanie0621. on 01 May 12, 14:53:28
I love Judy Garland so beautiful... She seems to be having a good relaxing time!! Also Natalie Wood I adore her? so beautiful too!

Check out the? tags ...
By: soapbxprod. on 01 May 12, 12:35:49
Check out the? tags list!~

HAHA! So damn ...
By: soapbxprod. on 01 May 12, 12:33:03
HAHA! So damn NORMAL! And how about David Selznick obsessing over the Times crossword? Budweiser and hot dogs... looks just like Fire Island back then, huh??

Judy Garland just ...
By: JudyGarlandstarstruk. on 30 Apr 12, 23:39:40
Judy Garland just sitting there casually smoking a cigarette? on a sunny afternoon wearing a lovely baby blue dress .....looking breathtaking !...INCREDIBLE FOOTAGE from the 60's...!

beautifull? Judy ...
By: sarakat76. on 30 Apr 12, 23:33:46
beautifull? Judy Garland!

You got? it!
By: soapbxprod. on 16 Apr 12, 14:57:05
You got? it!

The pretty blonde ...
By: havebold123. on 16 Apr 12, 11:28:19
The pretty blonde is? Tuesday Weld!

I'm curious...why ...
By: jaytlr9. on 16 Apr 12, 04:11:46
I'm curious...why did Roddy McDowall? (sp?) stipulate the condition?

Yes- she is listed. ...
By: soapbxprod. on 12 Apr 12, 23:01:38
Yes- she is listed...?

suzanne pleshette?
By: SUNMAYDEN518. on 12 Apr 12, 02:56:40
suzanne pleshette?

That's Ed Rosenthal ...
By: soapbxprod. on 10 Apr 12, 21:18:06
That's Ed Rosenthal, Roddy's longtime companion- A very? gifted cartoonist and artist- If you look at our other clips, you will see some of his work!

Who is the hunk ...
By: BUICKR. on 10 Apr 12, 19:03:48
Who is the hunk appearing for the first time at 1:00 in grey bathing suit and sun? glasses ? !

I recommend The ...
By: soapbxprod. on 10 Apr 12, 16:46:49
I recommend The Cincinnati Kid with Steve McQueen, Ann-Margret, Karl Malden.? Edward G. Robinson, Rip Torn, and Joan Blondell...

My pleasure! There ...
By: soapbxprod. on 10 Apr 12, 16:45:10
My pleasure! There is a list of names in the tags of all the people that we have? been able to identify...

great, thanks. ...
By: jdhf983y4uhu. on 10 Apr 12, 15:46:33
great, thanks. they're all a bit? before my time. i saw a tuesday weld film, or show with her in, when i was little and really liked her, i thought that was probably her. thanks.

Jane Fonda is? at 4 ...
By: soapbxprod. on 10 Apr 12, 15:23:25
Jane Fonda is? at 4:20, and Lauren is at 4:46 as you said- Natalie Wood is on frame left at 5:00! Tuesday Weld has a cigarette in her mouth at 30 seconds in... Judy Garland is at 5:15,

TIG Welding 4130 Chromoly Tubing
Posted by: weldingtipsandtricks

Video duration: 641 seconds
Global video hits: 10022

www.weldingtipsandtr icks.com tips for tig welding and how to tig weld 4130 chromoly tubing

Related: how to tig weld, gtaw, welding chrome-moly, tig welding 4130 tubing

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

Very impressive and ...
By: draygnol. on 27 May 12, 05:13:16
Very impressive and much appreciated. What amperage were you using,? and do you use the automatic setting to balance cleaning and penetration? (If your machine has one. My Lincoln 175 does.)

@ ...
By: landopolarisrzr. on 22 May 12, 00:30:06
@weldingtipsandtricks Your welds are amazing I want to be able to weld like you so bad, im going to Alexandria Tech for welding this fall. I hope when im done I? can weld like you. PS your videos help me a lot.

just finished it ? ...
By: weldingtipsandtricks. on 20 May 12, 18:58:10
just finished it ? and trying to get some good drawings done. maybe a few more days and then all of it will be on the website

gooood work?
By: sniperthss. on 20 May 12, 13:58:17
gooood work?

When are you gonna ...
By: dddaaayyynnneee. on 20 May 12, 02:29:09
When are you gonna finish the downdraft? table?!

Thanks Jody. Great ...
By: Phnug. on 18 May 12, 07:27:18
Thanks Jody. Great arc shots.?

Great info and ...
By: KJChaput. on 18 May 12, 04:22:49
Great info and great shots! I'd love to see how you get such great arc shots. Are you using a welding lens on the camera? By the way, I'm loving the tig finger! Best welding accessory I've ever owned bar none!?

Loved the video,? ...
By: j0x0r. on 17 May 12, 23:42:49
Loved the video,? Jody! Big thanks!

freeking ...
By: joelyboyblue. on 17 May 12, 20:19:00
freeking outstanding vid? jody!

Since there are so ...
By: weldingtipsandtricks. on 17 May 12, 13:17:06
Since there are so many gas welded fuselages still holding up that were welded in the early 40's I would say that color? is not a big concern on 4130 because all gas welds are dull and gray

Great video Jody? ...
By: JUSTINtime518. on 17 May 12, 03:45:43
Great video Jody? keep them coming. Much support from Albany New York!

That was a great ...
By: devvon. on 17 May 12, 01:30:51
That was a great video.. Best tips to me we're the pulse settings and tin foil... That was a genius can't wait to? pu

@1lapdown 120 hz. ...
By: weldingtipsandtricks. on 17 May 12, 00:40:33
@1lapdown 120 hz. And ac balance on about 65? with a 1/16" tungsten I like 2% lanth. Butt Thor and ceriated will also work fine

I'm right in the ...
By: 1lapdown. on 16 May 12, 21:32:02
I'm right in the middle of a Pitts S1-11 fuselage. I went out to the shop and re-set my TIG and your settings made a difference. Thanks for the tips! Also getting ready to weld some 5052 in .050 for the fuel and smoke tanks. Any suggested settings? I'm also using a Dynasty 200. Thanks for taking the time to share? your experiences .

I learn so many ...
By: stillbashingmetal. on 16 May 12, 21:05:59
I learn so many useful things from watching these videos,Jody. Thanks? for posting them. Argon dam..great idea. Never seen a magnifying lens for the welding helmet before...are theses things readily available at welding supply shops? Thanks again.

Awesome! Thanks ...
By: dragbike1300. on 16 May 12, 21:05:21
Awesome! Thanks for the Tips? & Tricks. One question... What's up with the Dynasty? I thought you used an Everlast.

Who is that one ...
By: Tactividz. on 16 May 12, 17:50:26
Who is that one dick who disliked this? He is welding a fuselage which has to be extremely well measured, and he is doing all this while demonstrating how it's done. I didn't know about Chromoly until this vid so I appreciate the knowledge,? why can't this guy?

Jody, A trick i ...
By: BRW6097. on 16 May 12, 14:18:54
Jody, A trick i learned to reduce? blow out at the end of a weld is to drill a 1/16" hole in the center of the joint of the open joint to releave the pressure build up.

Foil Ar Dam. Nice! ...
By: metalmorphist. on 16 May 12, 14:09:01
Foil Ar Dam. Nice! Sarge?

Jody, I was taught ...
By: DNCII1. on 16 May 12, 13:45:17
Jody, I was taught that heat input shouold be minimized and that chromoly welds should never go past straw color; if they are dull grey then they are over heated. The welds? in this video are all pretty dark in that respect. What say you? Thanks!!!

Man I just so love ...
By: Louranicas. on 16 May 12, 11:55:49
Man I just so love how you roll! I? always learn so much from what you give Jody A huge thumbs up to the internets WELDING GOD! Cheers M8!

Jody, any practice ...
By: budandbean1. on 16 May 12, 10:18:10
Jody, any practice exercises for chromoly like you set us up for aluminum? (welding the flat stock over and over) thanks for? all the tips!

Ty Ty TY.It? helps ...
By: Oratazana. on 16 May 12, 09:07:10
Ty Ty TY.It? helps alot.Keep on the good work.Thanks.

Awesome! Wow i was ...
By: jdmcommute. on 16 May 12, 06:19:43
Awesome! Wow i was going to ask you to do a 4130 tubing vid yesterday but never got around to it. Thanks man! I have a roll cage job coming up. Im still a beginner with tig, any other tips? I noticed in some spots you werent using very much rod, if the fit if really tight could i just weld it with? very little rod?

Jody, great video ...
By: PPimpDaddy1. on 16 May 12, 04:45:16
Jody, great video as always, your arc always looks so stable, do you? use a tungsten sharpener, or a grinder? Thanks.

stick welding explained for noobs. arc welding smaw
Posted by: freddytk421

Video duration: 210 seconds
Global video hits: 73066

Tom Gingras explaining the stick or smaw welding process. I am using the longevity lc-518 multi process here

Related: what, is, stick, smaw, welding, longevity, electrode, weld, howto, diy, repair, installation, weapons, instructions

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

it also burns out ...
By: katskratchkustumz. on 27 May 12, 04:37:49
it also burns out impurities before? you do a full weld on that piece when you whip ahead of your puddle

try that with a ...
By: hitachi088. on 23 May 12, 22:14:43
try that with a 45amp DC welder.? HAHAhaha.

i want to get into ...
By: xXSoRightXx. on 22 May 12, 11:49:28
i want to get into welding but i? have no previous experience in welding what so ever what do you recommend i do ?? maybe a pre apprenticeship? course ??

you can use a ...
By: hoytboy2010. on 20 May 12, 04:05:00
you can use a whipping motion with only fast freeze rods such as 6010's or 6011's to make a stack of dimes look, manly for root passes. but with any other rod you would just drag it across the metal, except when you do a vertical up with 7018. Then you can use a "u" motion up the plate or a "z weave". usually you have 2 beveled plates with an 1/8 inch landing, so you use a whipping? motion on the root pass with a 6010 and then you would do a fill and a cap with a 7018 using "u" motion or z weave

there's no irony ...
By: TheJmartin66509. on 30 Apr 12, 16:10:03
there's no irony dude stick welding is hard to get the hang of thats why most construction companys want to know if you can do it its the best I also mig and tig really good but stick welding kicks? my ass every time

thank you? for the ...
By: sherifframbo111. on 05 Apr 12, 02:19:01
thank you? for the video, I watched many less informing and painful videos before this one. well done

Great Video Brother ...
By: MrSKSkill. on 28 Mar 12, 23:23:08
Great Video Brother! ~MrSKSkill?

Same, it feels ...
By: TeamApparition. on 08 Feb 12, 05:00:16
Same, it feels amazing. I would recommend? it to anyone.

stick is known as M ...
By: wotasod. on 29 Jan 12, 04:12:04
stick is known as M M? A Manual Metal Arc

Do you live in ...
By: ToneIsEverything. on 22 Dec 11, 03:14:36
Do you live in Austin??

have you tried the ...
By: rockergod789. on 18 Dec 11, 00:40:23
have you tried the miller digital elite? i have? one and it's great!

I an? your hero?
By: LamborghiniDriver19. on 16 Dec 11, 21:58:13
I an? your hero?

wow. you're my hero ...
By: W857TYWH408576NW0348. on 14 Dec 11, 06:38:59
wow. you're my hero. plus you? drive a lamborghini. are you justin biber

But seriously, ...
By: W857TYWH408576NW0348. on 14 Dec 11, 02:16:26
But seriously, great video mate.?

i like? to weld in ...
By: W857TYWH408576NW0348. on 14 Dec 11, 02:12:31
i like? to weld in the nude.

the technique you ...
By: stackemup4. on 02 Dec 11, 01:57:33
the technique you should use is a half the electrodes diamater forawrd and a quarter back?

daym i cant really ...
By: supernes425. on 23 Nov 11, 02:14:39
daym i cant really get the foward-back motion...but i do mine in a? circle motion when i weld

35 year? old welder
By: LamborghiniDriver19. on 11 Sep 11, 00:40:27
35 year? old welder

I'm 14 and did ...
By: LamborghiniDriver19. on 11 Sep 11, 00:39:42
I'm 14 and did stick welding over the summer? it's really not hard and I'm using a 35 welder

DAMN!!!!! an arch ...
By: thefrayrocks12345. on 02 Sep 11, 15:33:49
DAMN!!!!! an arch spark is? really bright! I understand y need such a strong lense. I cnt wait to get to stick welding in my welding class!!!! And i dnt c y many girls arent into this........ there were 3 girls in my welding class(Me included) and on girl started ditching!!!!!!! -_- ima have fun with this shit!

It's both here, ...
By: tangles01. on 01 Aug 11, 09:35:41
It's both here, AS1210 Calls it Manual Yet? AS1554 call is Shield. Both are perfectly acceptible. but you yanks need to stat working in metric.

Thanks Freddy. I ...
By: valveman12. on 25 Jul 11, 01:07:20
Thanks Freddy. I have one of the HF 80A inverter. I bought it to try it out. Still trying to get the hang of making a nice bead. I seen your vids on using it. I'm? still not there yet. Funny how I'm great on Tig and Mig but stick, I'm not there yet.

you do that if you ...
By: freddytk421. on 24 Jul 11, 04:45:27
you do that if you are welding the root like open space between and if you went straight it would melt through. you hold it just until it almost drips out but move it up real fast for a? split second and it cools enough that you can keep going. you dont need to do it if the pieces are flush or anything like that. you can't do that with all rods just deep penetrating ones.

Hey Freddy? Gr8 ...
By: valveman12. on 24 Jul 11, 01:27:04
Hey Freddy? Gr8 video on SMAW. I TIG and MIG pretty well but ironically find ARC tricky. I see you move forward then back. I'll have to give that a try.

you can do that ...
By: freddytk421. on 08 Jun 11, 22:57:51
you can do that with 6010 rods. it mainly for root passes. i learned it at ACC from Tim? Strouse. LOL

Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40

Electronic Cigarette Videos

Search

Electronic Cigarette Related Videos

Electronic Cigarette Sponsors